TYPICAL LEVEL 4 REFURBISHMENT
WHERE NECESSARY:-
- Motors Checked - Skimmed baked and lacquered
- Cooling system
checked - Blocked pipes replaced, system cleaned
- Temperature
control panel - upgraded, new internals
- New sturdy bases to match centreline of Extruder/Downstream
- Addition
of gear pump to improve performance
- Addition of static mixer
to improve thermal consistency
- Addition of Co-extrusion block
to give multilayer facility AB, ABA, ABAC etc
- Addition or
upgrade of Co-extruder to improve output, change of co-ex
ratios etc
- Sheet Die - Alternative dies for thin or
thick, wide or narrow sheet
- Stack rollers - Re-chrome and
polish, replace rotary valves
- Downstream electrics and wiring
refurbish
- Pump group checked - new seals and bearing as required
- Haul
off rolls - recover rubber, check pneumatics
- Winder
- jumbo winder for 1200mm diameter rolls or
guillotine for thick sheet
|
| |
|
|
By a combination of inspection and repair where necessary,
TransXL can offer technically competent plant at very
competitive prices giving rapid payback times. We
can develop a repair plan with each client in order to
suit their requirements and remain within budget. |
|
THE VARIOUS LEVELS INCLUDE
(1) As is, seen
at appropriate prices
(2) Cleaned, checked and
dry cycle power tested
(3) Repair to specific
instruction
(4) Fully repaired, painted and dry
cycle power tested
|
|
|
|
