1200mm wide BG Plast PET sheet extrusion line for flakes.

1200mm wide BG Plast PET sheet extrusion line for flakes.
Description
1350mm wide BGPET.1350.120" FOR THE EXTRUSION OF PET FOILS 500 kgs/hour
Hopper with forced feeder and mixer specific for PET flakes
Special design single screw extruder model BGEX3.120 ** Screw was replaced in 2025
Single screw extruder 120mm made in special treated steel, nitrated.
Specially developed to precess up to 100% PET flakes, without pre-drying and crystallization.
-3 points of vacuum pump
GEARED MELT PUMP UNIT MODEL BGP.120
- casing made of forged steel alloy. Surfaces in contact with polymer are nitrated.
- gears made of steel alloy, nitrated, and with rectified and lapped toothing.
- sliding bearings, made of special hardened steel
- cartridge heaters, 7 kW
Including:
PUMP DRIVING UNIT
Composed of:
- servo-ventilated A.C.motor, 10 kW.
- geared reducer, parallel axis in vertical plane, complete with base for the fixing to the floor
- Cardan and telescopic adaptor complete with hubs for coupling to the pump reducer and protection case.
Coextruder 60mm with its control cabinet
Die - EDI Valueflex H100 Die 1200mm
Roll Stock -
CALANDER “COMPACT" MODEL BGC.1350
Calander specifications:
Number of roller: 3 ( 1 static and 2 movable).
Rollers diameter
1. Upper 320 mm 2. Central 450mm 3. Lower 320 mm
Rollers width: 1350 mm.
Screen Changer - Kryenborg AUTOMATIC BACKFLUSH SCREEN CHANGER TYPE K-SWE-101-4K-75/RS
Thermoregulation unit
Silicone bath
2 ROLLERS HAUL-OFF UNIT MOD.1350 WITH SILICONE BATH
Haul-off unit composed by:
Compact structure with vertical shaft and 2 rubbered rollers.
Width: 1350 mm
Helios Rotary cutter
4 station JUMBO WINDING UNIT ON TROLLEY 1350 (2 AXIS)
Specifications
| Manufacturer | BG Plast |
| Year | 2012 |
| Condition | Used |
| Stock Number | 009494 |
















