Process Polymer: ABS, PS, PP

Product thickness: 1-8mm

Product width: 1600mm

Body Material: Mold steel

Entrance: ☐ Round; ☑ Rectangular

Entrance Type: ☑ Upper;

With Interchageable lip

Lip opening range: 1-5mm

Output: 400kg/hr

Extra lower lip

Lip opening range: 5-8mm

Restrictor bar

Die insulation

Insulation cover is made of stainless plate, stone mica as insulator in between of die body

Heating Zone

Heating: ☑ Heater;

Heater Voltage: 230 V

Lead type: ☑ Socket;

Power lead: facing lip adjusting screws: ☑ Left side;

Heating zone of die body: 9 Zone

Heating zone of side plate: 2 Zone

Heating zone of lip: 1 Zone

Type of thermocouple: ☑ K type

Flow Channel Design Criteria

☑ GMA design according to data of rheological data, viscosity& Shear rate from buyer.;

Material of Construction

☑ Fabricated with mold steel through special machining treatment , hardness is around HRC 48-50 degree

Flow surface

Flow surface highly polished: Flow surface highly polished.

Roughness of lip land finshes below Ra0.05um

Plating

Flow channel: Hard chrome plated and mirroring process

Thickness of chrome layer: approx. 20-50 microns

HRC 58-62 degree

Die Exterior

Ground and plated for ease of maintenance.

Mounting supports taps provided

Fasteners

Metric threads, grade 12.9 body bolts

Bolts for lip adjustment

☑ Differential screw

Electric wire package

Included 1 sets of heaters

Included 1 sets of 750 degrees Celsius heat resistant wire.

Included multiple plugs, brand: Harting

Electric circuit schematic

Tool Kit

Adjusting tool kit

Operational Manual

Circuit Schematic

package and wooden case